R & D Capacity
| NO | Name | No. | Capacity | Functions | Equipment |
|---|---|---|---|---|---|
| 1 | Universal Material Testing Machine | E-E-022 |
Max Tension Force: 5,000 kgs Precision: ±1% |
Material tensile force and pullout force test |
|
| 2 | True Cylindricity Meter | E-E-114 |
Precision: Radial direction:(0.065+6H/10000)μm Axial direction:(0.05+6H/10000)μm |
True roundness test, true cylindricity test etc. |
|
| 3 | CMM | E-E-055 |
Max precision:±(1.8+L/300)μm Measure Range: X:700mm Y:1000mm Z:600mm |
Accurately check spare parts dimensions. |
|
| 4 | Cleanliness Measurement System E-E-059 | E-E-059 | 0.75~11.5*10 times micron pixel | Analyze abnormal subjects.. |
|
| 5 | CMM | E-E-113 |
Max precision: ±(1.5+L/350)μm Measure Range: X:700mm Y:1000mm Z:600mm |
Accurately check spare parts dimensions. |
|
| 6 | Mirco Projector | E-E-075 |
Max projection multiple: 200 times. Measure Range: X:300mm Y:200mm |
Accurately check spare parts dimensions. |
|
| 7 | Bearing Vibration Measuring Instrument | E-E-072 | Can measure 608、6000、6200 bearings noise. | Bearing noise test. |
|
| 8 | X-Ray | E-E-071 | Min. diameter：φ0.13mm | Observe the porosity of casting. |
|
| 9 | Hardness Tester | E-E-054 | HV45~HV940 harness test can be done. | Hardness test on spare parts. |
|
| 10 | Baking Oven | E-E-144 | Normal temp.~180℃ | Test in high temp. |
|
| 11 | Metallographic Precision Cutting Machine | E-E-159 | Max cutting diameter: 230mm | Sample cutting |
|
| 12 | Metallographic Specimen Embedding Machine | E-E-160 | Inlay diameter 40mm | Sample embedding |
|
| 13 | Metallographic Specimen Grinder | E-E-161 | Disc diameter 200 mm, 660 RPM Max | The sample is grounded after embedding |
|
| 14 | Hot & Cold Shock Testing Machine | E-E-162 |
Impact temp. under high temp..: (+ 60 ~ 150) ℃ Impact temp. under low temp...: (- 60 ~ 0) ℃ |
Test sample under cold and hot temp. shock. |
|
| 15 | Constant Temp. & Humidity Testing Machine | E-E-163 |
Temp.: (- 45 ~ 125) ℃ Humidity: RH 10% ~ 98% Temp. rise and fall speed: ≤ 1 ℃ / min |
Test under temp. and humidity cycle. |
|
| 16 | Salt Spray Testing Machine | E-E-167 |
Lab temp. range (normal temp. ~ 50 ℃) The temp. range of salt atomization pool can be set (normal temp. ~ 50 ℃) Temp. range of saturated barrel (normal temp. ~ 63 ℃) Salt spray volume: (0.5 - 3) ml can be set. |
Electroplating / powder coating Salt spray test |
|
| 17 | Electronic Balance | E-W-122 | Range: 0.0001-120g | Weight test |
|
| 18 | Stereo Microscope | E-E-171 | Max magnification 125x | Observation of sample morphology |
|
| 19 |
Precision Type Universal Material Testing Machine |
E-E-208 |
Measure range: 0 ~ 2000N Effective test range: 0.4% - 80% Load accuracy: ± 1% |
Part stretch Pull out force test |
|
| 20 | Constant Temp. & Humidity + Mechanism | E-E-186 |
Temp.: (- 45 ~ 125) ℃ Humidity: RH 10% ~ 98% Temp. rise and fall speed: ≤ 1 ℃ / min |
Temp. and humidity cycle test |
|